SM220FL ~ sm2100fl voltage 20 ~ 100 v 2.0 amp schottky barrier rectifiers elektronische bauelemente 16-may-2011 rev. a page 1 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed i ndividually. rohs compliant product a suffix of -c specifies halogen & lead-free features low forward surge current ideal for surface mounted applications low leakage current mechanical data case: jedec sod-123fl, molded plastic over passivated chip terminals: solder plated, solderable per mil-std-750, method 2026 polarity: color band denotes cathode end mounting position: any marking product marking code product marking code SM220FL 2s sm260fl 6s sm230fl 3s sm280fl 8s sm240fl 4s sm2100fl as package information package mpq leader size sod-123fl 2.5k 7 inch maximum ratings and electrical characteristics (rating 25 c ambient temperature unless otherwise specified. s ingle phase, half wave, 60hz, resistive or inductiv e load. for capacitive load, de-rate current by 20%.) parameter symbol part number unit sm 220fl sm 230fl sm 240fl sm 260fl sm 280fl sm 2100fl maximum recurrent reverse voltage v rrm 20 30 40 60 80 100 v maximum rms voltage v rms 14 21 28 42 56 70 v maximum dc blocking voltage v dc 20 30 40 60 80 100 v maximum instantaneous forward voltage @ i fm = 2.0a v f 0.50 0.55 0.72 0.85 v maximum average forward rectified current @ t j = 90 c i (av) 2.0 a peak forward surge current8.3ms single half sine-wave superimposed on rated load (jedec method) i fsm 40 a maximum dc reverse current at rated dc blocking voltage i r 0.3 ma typical junction capacitance c j 30 pf operating temperature range t j -55~125 c storage temperature range t stg -55~150 c notes 1. measured at f=1.0mhz, v r =4.0v sod - 123 fl e f b c d a g ref. millimeter ref. millimeter min. max. min. max. a 2.70 2.90 e 0.10 0.30 b 1.80 2.00 f 0.80 1.20 c 1.55 1.25 g 0.35 0.85 d 3.50 3.90
SM220FL ~ sm2100fl voltage 20 ~ 100 v 2.0 amp schottky barrier rectifiers elektronische bauelemente 16-may-2011 rev. a page 2 of 2 http://www.secosgmbh.com/ any changes of specification will not be informed i ndividually. characteristic curves
|
